skip to Main Content

$139.99$219.99

ECM The Economical 16 Channel Wireless Mic Solution (UHF)

Rated 0 out of 5
(be the first to review)
guitarist-and-band-performing
Description

The Galaxy Audio ECM Wireless Receiver is an economical solution to a great wireless microphone system. The ECM has 16 selectable channels, IR Sync, Diversity Antennas mounted to the front of the rugged plastic casing. The Galaxy Audio ECM Microphone System is available with a handheldbody pack with headsetlav, or instrument cable. 

ECMR Receiver

  • Output Volume Control
  • IR Sync Receiver to Transmitter
  • RF/AF Presence Indicators
  • Squelch Adjustment
  • XLR / 1/4″ Outputs
  • Rugged Plastic Casing

HH52 Handheld Transmitter

  • Dynamic Microphone Element
  • On/Off Switch
  • IR Sync Transmitter to Receiver
  • High/Low RF Switch
  • 10 mW / 5 mW
  • Metal Chassis
  • Operates on 2 AA Batteries (up to 8 hours Alkaline
  • Dimensions: 9.8″ x 2.1″ (250 x 53 mm) (L x Dia.)
  • Weight: 9.5 oz. (270 g)

MBP52 Body Pack Transmitter

  • Low Battery Indicator
  • 3 Position Switch
  • IR Sync Transmitter to Receiver
  • Mic/0/-10dB
  • Operates on 2 AA Batteries (up to 8 hours Alkaline)
  • Dimensions: 3.3″ x 2.6″ x 1″ (85 x 65 x 24 mm) (HxWxD)
  • Weight: 2.8 oz (80 g)
Configurations

ECMR
This includes the ECMR Receiver, 1/4" to 1/4" cable, and Power Supply.

 

 

ECMR/HH52
This system includes the ECMR Receiver, the HH52 Handheld Transmitter, 1/4" to 1/4" cable, and Power Supply.

Additional products in this configuration:

 

ECMR/52HS
Headset Mic: Uni-directional, Frequency Response 50Hz-18kHz. This system includes the ECMR Receiver, the MBP52 Body Pack Transmitter, the HS-U3BK Headset Microphone, 1/4" to 1/4" cable, and Power Supply.

Additional products in this configuration:

 

ECMR/52LV
Lavalier Mic: Uni Element, Lapel/Lavalier, Frequency Response 50Hz-19kHz. This system includes the ECMR Receiver, the MBP52 Body Pack Transmitter, the LV-U3BK Lavalier Microphone, 1/4" to 1/4" cable, and Power Supply.

Additional products in this configuration:

 

ECMR/52GTR
Guitar Cable: This system includes the ECMR Receiver, the MBP52 Body Pack Transmitter, the AS-GTR Guitar Cable, 1/4" to 1/4" cable, and Power Supply.

Additional products in this configuration:

 

ECMR/52
Body Pack: This system includes the ECMR Receiver, the MBP52 Body Pack Transmitter, 1/4" to 1/4" cable, and Power Supply.

Additional products in this configuration:

 

Accessories

HH52 Dynamic Wireless Handheld Microphone

Galaxy Audio HH52 Dynamic Handheld Microphone Transmitter for the PSE/ECM Wireless Microphone System

  • Dynamic Microphone Element
  • On/Off Switch
  • IR Sync Transmitter to Receiver
  • High/Low RF Switch
  • 10 mW / 5 mW
  • Metal Chassis
  • Operates on 2 AA Batteries (up to 8 hours Alkaline
  • Dimensions: 9.8" x 2.1" (250 x 53 mm) (L x Dia.)
  • Weight: 9.5 oz. (270 g)

MBP52 Wireless Microphone Body Pack for PSE & ECM Systems

Wireless Microphone Body Pack Transmitter for the PSE/ECM Wireless Microphone Systems

  • Low Battery Indicator
  • 3 Position Switch
  • IR Sync Transmitter to Receiver
  • Mic/0/-10dB
  • Operates on 2 AA Batteries (up to 8 hours Alkaline)
  • Dimensions: 3.3" x 2.6" x 1" (85 x 65 x 24 mm) (HxWxD)
  • Weight: 2.8 oz (80 g)

LV-U3BK

This affordable lav mic comes standard with the ECMPSE, TRC, DHT, DHXCTS, & Traveler Lavalier Systems. The LV-U3BK unidirectional lapel microphone works with transmitters made by Galaxy Audio®, Shure®, Sennheiser®, AKG®, and Audio Technica®, as well as most other brands of wireless microphone systems.

  • Uni-Directional
  • Lapel / Lavalier

HS-U3BK Uni Headset

This uni-directional headset comes standard with the ECMPSE, TRC, DHT, DHXCTS, & Traveler Headset Systems. It's comfortable wrap around design goes over both ears and helps ensure that this mic will stay in place. The HS-U3BK uni headset microphone can be wired to work with transmitters made by Galaxy Audio®, Shure®, Sennheiser®, AKG®, and Audio Technica®, as well as most other brands of wireless microphone systems.

  • Uni directional headset microphone
  • Hooks over both ears

Antenna Distributor ANT-DISTDC

The Wireless Microphone Antenna Distribution System expands wireless microphone systems only, by splitting one pair of antennas to allow up to four single channel receivers to use the same antennas. 3dB gain compensates for any insertion loss and increases receive signal range (up to 275ft). Low-loss 50 ohm BNC connectors for mounting antenna. Includes rack ears for mounting rack space (1RU) Distributes the antenna for up to 4 Wireless Microphone Systems (PSECTS, and DHX Series). BNC connectors, single rack space, combines power for up to four wireless receivers as well.
Note: Only works with wireless microphone receivers. This Wireless Microphone Antenna Distribution System does NOT work with In-Ear systems.

  • Combines Antennas for up to 4 mic receivers
  • Four DC outputs eliminate individual power supplies
  • 500MHz-900MHz Range
  • Built in Antenna Booster
  • Increase receiver signal rans up to 275 ft more
  • 3dB Gain Compensaton
  • 19" Rack Space

ANT-PDL

Wireless Directional Antenna used to decrease interference to other equipment.  Frequency range 500-900MHz

The UHF wide-band (500-900 MHZ) directional LPDA (log periodic dipole array) antenna reduces outside interference while providing increased send/receive signal range. Each antenna paddle is matched to 50 ohms impedance with a low-loss BNC connector; 7dBi gain. Professional wireless antenna for permanent or temporary installation; mounts to 5/8"-27 threads.

It is suggested that the angle between the paddle antenna and the thransmitter should be from 90º to 120º. Normally the effective range can reach about 300'.

  • 500-900 MHz
  • LPDA antenna
  • 7dBi gain
  • Can mount to mic stand
  • Improves Range

Power Supply PS-13.5-.35.5

Microphone power supply for AS-900T, AS-1100T, AS-1400T, VESR, VSCR, ECDR, EDXR, ECMR, PSER, DHTR, & DHXR.

  • 13.5 Volt 300 mA-
  • 5.5 mm PLUG

Universal Power Adaptor AS-UA12-14.5

Universal Power Adaptor. The AS-UA12-14.5 supplies 12V DC at 1000mA to Our Wireless Microphone & Monitor systems such as the DHT, DHX, DHTRQUAD, DHXR4, PSE, ECM, ECD, EDX, AS-900, Galaxy Audio AS-1100 & AS-1800 using the common 5.5mm barrel plug with center positive. The universal AC power adaptor comes with 4 different AC plug adaptors, and will accept any input voltage from 100 to 240v AC, 50-60Hz, which means it will work in nearly every country on the planet.

  • 12V DC 1000mA  
  • 5.5mm PLUG
  • Converts Systems To Accept 230 VAC.

MICCLIPSI

Standard Mic Clip for Handheld Microphones

Specifications
ECM SYSTEM SPECS  
Available Channels 16
Frequency Range CODE D 584~607MHz
CODE N 518~542MHz
Transmitter Output Level 10 mW
Band UHF
Operating Range Under Typical Conditions 200' (61 m), actual range depends on RF signal absorption, reflection, and interference.
Audio Frequency Response (+/-3 dB) 70 Hz ~ 16 kHz
Total Harmonic Distortion (+/-30 kHz deviation 1 kHz tone): <1%
Dynamic Range >90 dB A-weighted
Operating Temperature Range 14º F to 122º F (-10º C to +50º C), battery characteristics may limit this range
   
ECM RECEIVER  
Audio Output Level (+/-30kHz deviation, 1kHz tone) XLR connector (into 600 Ohms load) -12 dBV
1/4" connector (into 3k Ohms load) -18 dBV
Output Connections 1 Male XLR Balanced
1/4" Unbalanced
Output Impedance XLR connector 200 Ohms
1/4" connector 1 k Ohms
XLR Output Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio +
Pin 3: No Audio -
Sensitivity -93 dBm for 30 dB
Image Rejection >90 dB
Casing Rugged Plastic
Dimensions 1.75" x 9.25" x 4.75" (44.45 x 235 x 121 mm) (HxWxD)
Weight 13.6 oz (390 g)
Power Requirements 13.5 V dc at 300mA, supplied by external power supply
   
HH52 HANDHELD TRANSMITTER  
Max Audio Input Level 0 dBV
Gain Adjust Trim Pot
RF Output 10 mW, 5 mW
Frequency Response 70 Hz - 15 kHz
Dimensions 9.8" x 2.1" (250 x 53 mm) (Lx Dia)
Weight 9.5 oz. (270 g) (without batteries)
Power Requirements 2 “AA” size alkaline or rechargeable batteries
Battery Life About 8 hours (alkaline)
   
MBP52 BODY PACK TRANSMITTER  
Max Audio Input Level 0 dBV to +10 dBV
Gain Adjust Mic / 0 dB / -10 dB
Input Impedance 5 k Ohms
Dimensions 3.3" x 2.6" x 1" (85 x 65 x 24 mm) (HxWxD)
Weight 3.0 oz (85 g) (without batteries)
Power Requirements 2 “AA” size alkaline or rechargeable batteries
Battery Life About 8 hours (alkaline)
Downloads
ECM Quickstart Guide ( PDF - 0.65 MB )
ECM Manual ( PDF - 3.26 MB )
ECM Cut Sheet ( PDF - 0.42 MB )
Frequencies ( PDF - 9.95 MB )
Reviews (0)

Reviews

There are no reviews yet.

Leave a customer review

Your email address will not be published. Required fields are marked *

Share this product

Cart
Back To Top
Search