skip to Main Content

$109.99$219.99

EDX Professional Dual Channel Wireless Mic System (UHF)

Rated 0 out of 5
(be the first to review)
guitarist-and-band-performing
Description

The EDX Series is a professional dual channel UHF wireless microphone system. The EDX features 2 internal antennas (1 for each receiver), 16 selectable channels on each receiver, and IR Sync from receiver to transmitter. The EDX has 2 discreet male XLR outputs and 1 combined 1/4″ output on the back of the unit. The output is controlled by a volume control for each receiver, located on the front of the unit.

The EDXR 2 channel wireless microphone system can be used and will sync with either the HH38 handheld or the MBP38 body pack transmitters. Systems with the MBP38 body pack are available with either a lavalier, or headset. Both transmitters feature an on/off switch and are powered by two “AA” batteries. The MBP38 body pack transmitter also features a Mic/0/-10 selector switch for various input level sources.

EDXR Receiver

  • Dual Channel Receiver
  • AF & RF Indicators
  • IR Sync Receiver to Transmitters
  • 1 Mixed 1/4″ Output, 2 Balanced Male XLR Outputs
  • 2 Internal Antennas (Non-Diversity)
  • Rugged Plastic Casing

HH38 Transmitter

  • Dynamic Cardioid
  • On/Off Switch
  • IR Sync Transmitter to Receiver
  • Plastic Casing
  • Operates on 2 AA Batteries (up to 8 hours Alkaline)
  • Dimensions: 10.9″ 1.85″ (277 x 47 mm) (LxDia)
  • Weight: 6.9 oz (195 g)

MBP38 Transmitter

  • On/Off/Standby Switch
  • IR Sync Transmitter to Receiver
  • Mic / 0 dB / -10 dB pad
  • Durable Plastic Casing
  • Operates on 2 AA Batteries (up to 8 hours Alkaline)
  • Dimensions: 3.3″ x 2.55″ x 1″ (83.8 x 64.8 x 25.4 mm) (HxWxD)
  • Weight: 2.8 oz (80 g)
IR Syncing the EDX System
EDX Introduction Video
Configurations

EDXR
This includes the EDXR Receiver, 1/4" to 1/4" cable, and Power Supply

 

EDXR/HH38
This system includes the EDXR Receiver, 2 HH38 Handheld Transmitters, 1/4" to 1/4" cable, and Power Supply

Additional products in this configuration:

 

EDXR/38SS
Headset Microphones: Uni-Directional. This system includes the EDXR Receiver, 2 MBP38 Body Pack Transmitters, 2 HS13-UBK Headset Microphones, 1/4" to 1/4" cable, and Power Supply

Additional products in this configuration:

 

EDXR/38SV
Headset and Lavalier Microphones: Uni-Directional. This system includes the EDXR Receiver, 2 MBP38 Body Pack Transmitters, the HS13-UBK Headset Microphone, the LV13-UBK Lavalier Microphone, 1/4" to 1/4" cable, and Power Supply

Additional products in this configuration:

 

EDXR/38VV
Lavalier Microphones: Uni-Directional. This system includes the EDXR Receiver, 2 MBP38 Body Pack Transmitters, 2 LV13-UBK Lavalier Microphones, 1/4" to 1/4" cable, and Power Supply

Additional products in this configuration:

 

EDXR/HHBPS
Headset & Handheld Microphone: Uni-Directional. This system includes the EDXR Receiver, the HH38 Handheld Transmitter, the MBP38 Body Back Transmitter, the HS13-UBK Headset Microphone, 1/4" to 1/4" cable, and Power Supply

Additional products in this configuration:

 

EDXR/HHBPV
Lavalier & Handheld Microphone: Uni-Directional. This system includes the EDXR Receiver, the HH38 Handheld Transmitter, the MBP38 Body Back Transmitter, the LV13-UBK Lavalier Microphone, 1/4" to 1/4" cable, and Power Supply

Additional products in this configuration:

 

Accessories

HH38 Dynamic Wireless Handheld Microphone

Galaxy Audio HH38 Dynamic Handheld Mic Transmitter with On Off Switch for the EDX Wireless Microphone System

  • Dynamic Cardioid
  • On/Off Switch
  • IR Sync Transmitter to Receiver
  • Plastic Casing
  • Operates on 2 AA Batteries (up to 8 hours Alkaline)
  • Dimensions: 10.9" 1.85" (277 x 47 mm) (LxDia)
  • Weight: 6.9 oz (195 g)

MBP38 Wireless Microphone Body Pack for EDX Systems

MBP38 Lav Transmitter Body Pack Transmitter for the EDX Wireless Microphone System

  • On/Off/Standby Switch
  • IR Sync Transmitter to Receiver
  • Mic / 0 dB / -10 dB pad
  • Durable Plastic Casing
  • Operates on 2 AA Batteries (up to 8 hours Alkaline)
  • Dimensions: 3.3" x 2.55" x 1" (83.8 x 64.8 x 25.4 mm) (HxWxD)
  • Weight: 2.8 oz (80 g)

HS13-UBK Headset

The Galaxy Audio HS13-UBK uni-directional headset comes as a standard option with the EDX Headset System. Its comfortable wrap-around design goes over both ears and helps ensure that this mic will stay in place.

●  Uni-Directional
●  Hooks Over Both Ears
●  Standard with EDX
●  TRS 3.5mm connector

LV13-UBK Uni-Directional Lav

This uni-directional lavalier microphone comes as a standard option with the EDX Lavalier Systems.

●  Uni-Directional
●  Lapel / Lavalier
●  Standard with EDX

Antenna Distributor ANT-DISTDC

The Wireless Microphone Antenna Distribution System expands wireless microphone systems only, by splitting one pair of antennas to allow up to four single channel receivers to use the same antennas. 3dB gain compensates for any insertion loss and increases receive signal range (up to 275ft). Low-loss 50 ohm BNC connectors for mounting antenna. Includes rack ears for mounting rack space (1RU) Distributes the antenna for up to 4 Wireless Microphone Systems (PSECTS, and DHX Series). BNC connectors, single rack space, combines power for up to four wireless receivers as well.
Note: Only works with wireless microphone receivers. This Wireless Microphone Antenna Distribution System does NOT work with In-Ear systems.

  • Combines Antennas for up to 4 mic receivers
  • Four DC outputs eliminate individual power supplies
  • 500MHz-900MHz Range
  • Built in Antenna Booster
  • Increase receiver signal rans up to 275 ft more
  • 3dB Gain Compensaton
  • 19" Rack Space

ANT-PDL

Wireless Directional Antenna used to decrease interference to other equipment.  Frequency range 500-900MHz

The UHF wide-band (500-900 MHZ) directional LPDA (log periodic dipole array) antenna reduces outside interference while providing increased send/receive signal range. Each antenna paddle is matched to 50 ohms impedance with a low-loss BNC connector; 7dBi gain. Professional wireless antenna for permanent or temporary installation; mounts to 5/8"-27 threads.

It is suggested that the angle between the paddle antenna and the thransmitter should be from 90º to 120º. Normally the effective range can reach about 300'.

  • 500-900 MHz
  • LPDA antenna
  • 7dBi gain
  • Can mount to mic stand
  • Improves Range

Power Supply PS-13.5-.35.5

Microphone power supply for AS-900T, AS-1100T, AS-1400T, VESR, VSCR, ECDR, EDXR, ECMR, PSER, DHTR, & DHXR.

  • 13.5 Volt 300 mA-
  • 5.5 mm PLUG

Universal Power Adaptor AS-UA12-14.5

Universal Power Adaptor. The AS-UA12-14.5 supplies 12V DC at 1000mA to Our Wireless Microphone & Monitor systems such as the DHT, DHX, DHTRQUAD, DHXR4, PSE, ECM, ECD, EDX, AS-900, Galaxy Audio AS-1100 & AS-1800 using the common 5.5mm barrel plug with center positive. The universal AC power adaptor comes with 4 different AC plug adaptors, and will accept any input voltage from 100 to 240v AC, 50-60Hz, which means it will work in nearly every country on the planet.

  • 12V DC 1000mA
  • 5.5mm PLUG
  • Converts Systems To Accept 230 VAC.

MICCLIPSI

Standard Mic Clip for Handheld Microphones

Specifications
EDX SYSTEM SPECS  
Available Channels 16
Frequency Range CODE D 584-607 MHz
CODE N 518-542 MHz
Transmitter Output Level 10 mW
Band UHF
Operating Range Under Typical Conditions 200' (61 m), actual range depends on RF signal absorption, reflection, and interference.
Audio Frequency Response (+/-3 dB) 60 Hz ~ 16 kHz
Total Harmonic Distortion (+/-30 kHz deviation 1 kHz tone): <1%
Dynamic Range >90 dB A-weighted
Operating Temperature Range 14º F to 122º F (-10º C to 50º C), battery characteristics may limit this range.
   
EDXR RECEIVER  
Audio Output Level XLR Connector (into 600 Ohms load) -12 dBV
1/4" Connector (into 3 k Ohms load) -18 dBV
Output Impedance XLR Connector 200 Ohms
1/4" Connector 1 k Ohms
Sensitivity -92 dBm
Image Rejection >92 dB
Dimensions 1.7" x 8.3" x 5" (42 x 210 x 127 mm) (HxWxD)
Weight 13.6 oz (390 g)
Power Requirements 12-18 V dc at 300mA, supplied by external power supply
   
HH38 HANDHELD TRANSMITTER  
Max Audio Input Level 0 dBV
Gain Adjust Trim pot
RF Output 10 mW
Frequency Response 70 Hz - 10 kHz
Dimensions 10.9" x 1.85" (277 x 47 mm) (LxDia.)
Weight 6.9 oz (195 g) (without batteries)
Power Requirements 2 “AA” size alkaline or rechargeable batteries
Battery Life About 8 hours (Alkaline)
   
MBP38 BODY PACK TRANSMITTER  
Max Audio Input Level 0 dBV to +20 dBV
Gain Adjust Mic / 0 dB / -10 dB
RF Output 10 mW
Input Impedance 5 k Ohms
Dimensions 3.3" x 2.6" x 1" (85 x 65 x 23 mm) (HxWxD)
Weight 2.8 oz (80 g) (without batteries)
Power Requirements 2 “AA” size alkaline or rechargeable batteries
Battery Life About 8 hours (Alkaline)
Downloads
EDX Quickstart ( PDF - 1.69 MB )
EDX Manual ( PDF - 4.23 MB )
EDX Cut Sheet ( PDF - 0.48 MB )
Frequencies ( PDF - 9.95 MB )
Reviews (0)

Reviews

There are no reviews yet.

Leave a customer review

Your email address will not be published. Required fields are marked *

Share this product

Cart
Back To Top
Search